DIY: Acura NSX Front Lip Replacement Installation Instructions

If you have a 1991 through 2001 Acura NSX and would like to replace the front lip (aka front under spoiler) with another OEM part or aftermarket lip, here’s how you do it:

Job: Install New Front Lip on Acura NSX

Difficulty: Easy

Time: Less than 1 hour

Tools required: Ratchet with 10 mm socket with extension or a deep socket

Number of people recommended: 1

Continue reading “DIY: Acura NSX Front Lip Replacement Installation Instructions”

DIY: Valentine 1 Radar Hardwire Install on BMW E93 Convertible Using a Wire Tap

Hardwiring your radar detector, in this case a Valentine 1 (commonly referred to as a v1), is a required mod on pretty much any car. It saves you from using one of your available cigarette lighter sockets, allows you to mount the radar high up on the windshield and most of all, it gets rid of that ugly power cord that gets in the way of so many things. To hardwire a radar simply means that you will use an alternate power source available in the vehicle allowing the radar to turn on and off with the ignition. The wiring is hidden for the most part and the radar can be mounted high up on the windshield for maximum performance.

Continue reading “DIY: Valentine 1 Radar Hardwire Install on BMW E93 Convertible Using a Wire Tap”